Glass subway tile – Glass subway tiles are clear, square, unlike square shape, some subway tiles provide a transparent brick like appearance to the walls, so you can use them as tiles for appearance usually associated with the bathroom walls. The mount in place much as ceramic tiles, with a dry set mortar that has a special additive, which assists the smooth non-porous glass bonding to the wall. Because they are made of glass, is subway tile is available in a variety of colors, making your new tiled surface easy to blend into an existing decorative pattern.
Install glass subway tile, inspect the walls, where you want to set the tiles for any cracks. Clean the surface of the wall with a pH-neutral soap and a sponge. Measure the length and width of the wall then use these measurements to create a test pattern of subway tiles on a clear surface. Use as many full tiles as possible to create your pattern and an estimate of the amount of tile cutting needed to complete the installation.
Mix a white dry-set mortar in a large bucket by the manufacturer for the amount of water to add. Attach a paddle bit to an electric drill for mixing mortar until it has the consistency of peanut butter. Add an acrylic add-mix mortar; follow package instructions for the amount to add to the weight of the mortar used. The add-mix will aid in the bonding of non-porous glass subway tile to the mortar. Spread the mortar on the wall, starting at the bottom center of the wall and covers about 2 square meters of wall space, with a 16/03 inch notched trowel. Spread a thin layer of dry set at the back of the tiles, and then the tiles on the wall, working upwards and to the left to the right. Shape tiles to fit around the light switches by snipping through the tiles with tile nippers. Cut the tiles needed for the edges with a tile cutter. Wait 72 hours mortar dry. Remove tile spacers. Push the grout in the tile faces into the joints with the edge of a grout float.clear subway tile, glass subway tile bathroom