Kids will love the bunk. A bunk bed slide is not only a place to sleep, but also a place for imaginative play, where the addition of a curtain, flag or slide, it becomes a tent, Mount Everest or a playground. The slides are a favorite, especially when rain or snow keeps children indoors. Place two tables, one beside the other, on a flat surface side of 3.81 cm cut sides facing upward. Measure and mark 10.16 cm in from each edge of the table. Then measure and mark every 45.72 cm in both tables. The marks must be aligned in both tables.
Separate tables 5.08 x 15.24 cm with a 61 cm. Place a table of 2.54 x 10.16 cm on each side marked with the 8.89 cm up stuck to the tables of 5.08 x 15, 24 measuring the space of bunk bed slide. Drilling two holes for screws at each end, through the tables 2.54 x 10.16 cm and within the tables of 5.08 x 15.24 cm.
Turn under the bunk bed slide. Place the plywood into the frame, aligning it with the edge of the rails 5.08 x 15.24 cm. Four holes drilled through the plywood and within brackets 2.54 x 10.16 cm. Screw the plywood to the boards with screws for surfaces of 2.54 cm.More reader came from this term:bed slide plans, bunk bed slide only, twin bunk bed with slide, how to make a slide for a bunk bed, twin bed slide, twin bunk beds with slide